Perfboard Designer

Connect Remote server

claude mcp add --transport http mcp https://mcp.perfboarddesigner.com/mcp

{
  "mcpServers": {
    "mcp": {
      "url": "https://mcp.perfboarddesigner.com/mcp"
    }
  }
}

{
  "servers": {
    "mcp": {
      "type": "http",
      "url": "https://mcp.perfboarddesigner.com/mcp"
    }
  }
}

Settings > Connectors > Add custom connector
URL: https://mcp.perfboarddesigner.com/mcp

Tools 12 found in our last check

• list_parts

  Lists the parts a project can place. Without a query: every part, grouped by category, as its id with its name and pin count; call it this way once to see what there is. With a query: the parts whose id, name, category or keywords contain all its words, or the closest ones when…

• get_part

  Everything needed to place parts: for each, which project file list it goes in, its pins (offsets from pin 1 at rotation 0) and pin labels, polarity, value unit, holes its body covers, and an example entry. Ask for every part you use in one call with `ids`.

• new_project

  Starts a project kept here under a projectId: a blank board, or one of the example projects (perfboard://examples/...) to copy from. Returns the projectId and the project file. Then add parts and wires with edit_project, and pass the projectId to every other tool instead of the…

• edit_project

  Changes a project kept here, by a list of ops applied in order: add_part, update_part (move, turn, change value or ref), remove_parts, add_wire (from/to, or a `path` of holes made into one wire per leg), update_wire, remove_wires, set_board, add_cuts / remove_cuts (stripboard),…

• get_project

  The whole project file of a project kept here, as the editor would save it (through version 8, preserving component identities and optional requirements), one entry per line.

• validate_project

  Checks a project file and lists every problem with where it is: entries the editor would leave out, unknown parts, pins off the board, two parts' pins or leads in one hole, overlapping parts, wires that connect nothing (a loose end, or no pins on their net), duplicate wires, a t…

• get_nets

  Which pins the board connects: every net with its name (from its pins, e.g. GND), its pins ("U1.8 VCC" for a chip's pin, "D1.K" or "C1.+" for a polarized lead, "R1.1" otherwise) and the wires on it (indexes into wires). Also pins connected to nothing, wires that connect no pins,…

• get_pin_positions

  Where every placed part's pins land, as [column, row] holes, with pin numbers and labels (e.g. U1 pin 8 VCC), after rotation, plus holes a part's body covers. Use it to route wires to the right holes. The project file doesn't store these: they follow from each part's anchor, rot…

• render_board

  Draws the board as text, one cell per hole with column and row numbers: each part's pins by a key letter and pin number (a1, a2...), holes under a part's body, wire ends, the holes a wire runs over without joining them, strip cuts and holes with notes. Below it, which part each…

• make_share_link

  Turns a project into a link that opens it in Perfboard Designer: the project travels inside the link, so it works without any server. Give the link to the user. A project with a description (edit_project's set_description) also gets `page`: the same link opening a page to read,…

• read_share_link

  Reads the project out of a Perfboard Designer share link (z=, json=, downloaded src=, or a stored short link). Returns a project file through version 8, preserving component identities and optional requirements, kept under the returned projectId: change it with edit_project.

• show_board

  Shows the user a picture of the board right in the conversation, as the editor draws it, with a button that opens it in Perfboard Designer. Only in clients that show MCP Apps (e.g. Claude, ChatGPT); elsewhere the user sees nothing, so give them make_share_link's link too. The pi…

Details

More other servers See all

• SalaryNet Payroll

  Gross-to-net pay and employer cost for US, PH, NG, ID, IN, BR, KE, VN with official sources.

• Auto Öz

  Auto Öz: Kontakt, Standorte, Öffnungszeiten, Leistungen und Angebote, Freie Termine, Termin…

• CGC Airport Transfers

  Fixed-price quotes and bookings for private airport transfers: Gold Coast, Brisbane, Byron Bay.

• Coral

  Private, non-explicit intimacy exercises, scripts and a couples quiz for adults 18+.

• Business valuation calculator

  Estimates what a buyer might pay for a small agency, service or SaaS business, in US dollars.

• BuildYourWolfpack

  Roast-to-order coffee with a game built in: missions, Pack Points, and your own wolf pack.