NestDaddy

Siglent SDM3045X multimeter

io.github.shaag7967/mcp-server-siglent-sdm3045x · v0.1.1

Measurements with a Siglent SDM3045X bench multimeter via USB or LAN (unofficial)

Connect Runs on your machine

Terminal
claude mcp add mcp-server-siglent-sdm3045x -e SDM_RESOURCE=<SDM_RESOURCE> -e SDM_SERIAL=<SDM_SERIAL> -e SDM_ALLOW_SCPI=<SDM_ALLOW_SCPI> -e SDM_VISA_BACKEND=<SDM_VISA_BACKEND> -- uvx mcp-server-siglent-sdm3045x==0.1.1
claude_desktop_config.json
{
  "mcpServers": {
    "mcp-server-siglent-sdm3045x": {
      "command": "uvx",
      "args": [
        "mcp-server-siglent-sdm3045x==0.1.1"
      ],
      "env": {
        "SDM_RESOURCE": "<SDM_RESOURCE>",
        "SDM_SERIAL": "<SDM_SERIAL>",
        "SDM_ALLOW_SCPI": "<SDM_ALLOW_SCPI>",
        "SDM_VISA_BACKEND": "<SDM_VISA_BACKEND>"
      }
    }
  }
}
~/.cursor/mcp.json
{
  "mcpServers": {
    "mcp-server-siglent-sdm3045x": {
      "command": "uvx",
      "args": [
        "mcp-server-siglent-sdm3045x==0.1.1"
      ],
      "env": {
        "SDM_RESOURCE": "<SDM_RESOURCE>",
        "SDM_SERIAL": "<SDM_SERIAL>",
        "SDM_ALLOW_SCPI": "<SDM_ALLOW_SCPI>",
        "SDM_VISA_BACKEND": "<SDM_VISA_BACKEND>"
      }
    }
  }
}
.vscode/mcp.json
{
  "servers": {
    "mcp-server-siglent-sdm3045x": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "mcp-server-siglent-sdm3045x==0.1.1"
      ],
      "env": {
        "SDM_RESOURCE": "<SDM_RESOURCE>",
        "SDM_SERIAL": "<SDM_SERIAL>",
        "SDM_ALLOW_SCPI": "<SDM_ALLOW_SCPI>",
        "SDM_VISA_BACKEND": "<SDM_VISA_BACKEND>"
      }
    }
  }
}

Replace the values in angle brackets with your own. Keys stay on your machine; we never see them.

Tools

This server runs locally, so its tools are listed by your MCP client once it starts.

Environment variables

NameDescription
SDM_RESOURCE
Optional
Instrument address: /dev/usbtmc0, an IP address or a VISA resource string. Auto-detected on USB and in the local network if not set.
SDM_SERIAL
Optional
Serial number of the instrument to use when several are connected (auto-detection only)
SDM_ALLOW_SCPI
Optional
Set to 1 to enable the raw SCPI tool, which can change any instrument setting
SDM_VISA_BACKEND
Optional
PyVISA backend: @py (pyvisa-py) or @ivi for an installed NI/Keysight VISA

Details

Package[email protected] (PYPI, stdio)
First published29 Oct 2026
Last updated29 Oct 2026
Registry nameio.github.shaag7967/mcp-server-siglent-sdm3045x

More other servers See all

Listing data from the official MCP registry. Status and tools from NestDaddy's daily check. Browse all MCP servers.