TuneWorks

Connect Remote server

claude mcp add --transport http tuneworks https://tuneworks.ai/mcp

{
  "mcpServers": {
    "tuneworks": {
      "url": "https://tuneworks.ai/mcp"
    }
  }
}

{
  "servers": {
    "tuneworks": {
      "type": "http",
      "url": "https://tuneworks.ai/mcp"
    }
  }
}

Settings > Connectors > Add custom connector
URL: https://tuneworks.ai/mcp

Tools 80 found in our last check

• calculate_race_fuel_and_weight

  Plan a race fuel load, reserve, start weight, and projected minimum-weight margin. Calculates from measured inputs without authentication and does not read or save account data. Assumes the entered per-lap consumption applies to race, formation, and allowance laps. Finish weight…

• calculate_gear_ratio_speed

  Check speed, RPM, and shift drop from tire size, final drive, and gear ratio. Calculates from measured inputs without authentication and does not read or save account data. Use measured tire diameter when possible. Tire growth and converter/clutch slip can move real-world number…

• calculate_tire_pressure_adjustment

  Turn cold, hot, and target hot pressures into the next cold pressure to try. Calculates from measured inputs without authentication and does not read or save account data. This gives a next-test pressure, not a universal ideal. Recheck after the next run.

• calculate_corner_balance

  Calculate cross weight, left/right balance, and front/rear split from four scale pads. Calculates from measured inputs without authentication and does not read or save account data. Measure the car in the same state you drive it: driver, fuel, ballast, and tire pressures matter.

• calculate_spring_wheel_rate

  Convert spring rate and motion ratio into wheel rate for setup comparisons. Calculates from measured inputs without authentication and does not read or save account data. Wheel rate compares spring changes. It does not account for bars, bump stops, tires, or aero load.

• calculate_fuel_injector_size

  Estimate injector size from horsepower, fuel type, injector count, and duty cycle. Calculates from measured inputs without authentication and does not read or save account data. This is a sizing estimate. Confirm with your tuner and fuel pressure data.

• convert_afr_lambda

  Convert AFR and lambda across gasoline, E85, methanol, and race fuel scales. Calculates from measured inputs without authentication and does not read or save account data. Use this as a conversion reference. Tune targets depend on fuel, engine, load, and calibration strategy.

• calculate_brake_bias

  Estimate front brake bias from piston area, rotor size, and pad friction. Calculates from measured inputs without authentication and does not read or save account data. This estimates mechanical bias. Tire grip, weight transfer, ABS, and balance bars still matter.

• compare_tire_sizes

  Compare tire diameter, circumference, ride height, and speedometer change. Calculates from measured inputs without authentication and does not read or save account data. Actual mounted diameter changes by tire model and pressure. Use manufacturer specs when available.

• check_race_alignment

  Check camber and total toe against broad autocross and track baseline ranges. Calculates from measured inputs without authentication and does not read or save account data. This is a baseline checker, not a vehicle-specific prescription. Tire wear and driver feedback decide the…

• calculate_lap_time_delta

  Compare two laps or sector sets and see the best theoretical lap. Calculates from measured inputs without authentication and does not read or save account data. Use sectors from timing, video, or data logs. Compare similar conditions before blaming setup.

• calculate_ethanol_blend

  Calculates an ethanol blend for a fresh tank, existing fuel, correction, or ratio without authentication or account-data access. Percentages are 0–100 and all volumes use the selected unit. Source ethanol contents are measured values. Fresh mode requires finalVolume; existing mo…

• get_tuneworks_website_handoff

  Returns the canonical TuneWorks website destination for an intentionally website-only AI, file-transfer, visualization, account, installation, invitation, or billing workflow.

• diagnose_handling_issue

  Provides understeer/oversteer setup guidance without authentication or access to TuneWorks account data.

• analyze_tire_temperatures

  Interprets inside, middle, and outside tire temperature readings without authentication or access to TuneWorks account data.

• recommend_autocross_damper_adjustment

  Provides a bounded shock/damper adjustment recommendation without authentication or access to TuneWorks account data.

• find_autocross_sites

  Search the public TuneWorks Autocross Site Finder by coordinates and minimum paved-area dimensions. This may take several minutes because it queries live map and imagery providers.

• get_tuneworks_app_capabilities

  Describes TuneWorks free public capabilities and connected garage capabilities for vehicles, setups, sessions, maintenance, shop lists, Share Build, and log history.

• create_vehicle

  Adds a vehicle to the connected user’s TuneWorks garage so setup, session, modification, maintenance, and optimization context can be attached. Deletes are not supported.

• update_vehicle

  Edits an existing vehicle in the connected user’s TuneWorks garage. Deletes are not supported.

• list_vehicle_modifications

  List bounded structured modifications for an accessible TuneWorks vehicle.

• get_vehicle_modification

  Read one structured modification from an accessible TuneWorks vehicle.

• create_vehicle_modification

  Create a structured modification on an editable TuneWorks vehicle.

• update_vehicle_modification

  Update a structured modification on an editable TuneWorks vehicle.

• archive_vehicle_modification

  Mark a modification canceled so it remains in vehicle history. Requires explicit confirmation.

• delete_vehicle_modification

  Permanently delete a vehicle modification and its files. Requires explicit confirmation.

• get_garage_summary

  Returns the connected garage, its activation stage, missing baseline data, and the next available actions toward vehicle optimization.

• list_vehicles

  Lists vehicles saved in the connected user’s TuneWorks app garage and reports the next activation action when the garage is empty.

• get_vehicle_context

  Returns one saved TuneWorks vehicle with modifications, setups, sessions, maintenance, lists, log metadata, optimization readiness, and next actions.

• list_logs

  List bounded metadata for logs attached to one connected TuneWorks vehicle. Raw log samples are not returned.

• get_log_context

  Read bounded metadata, channel schema summary, and saved focus window for one accessible TuneWorks log. Raw log samples are not returned.

• list_ai_log_tuner_transcripts

  List recent AI Log Tuner conversations owned by the connected TuneWorks user. Returns conversation metadata without message contents.

• get_ai_log_tuner_transcript

  Read the ordered messages and saved analysis summaries for one AI Log Tuner conversation owned by the connected TuneWorks user.

• list_ai_race_engineer_transcripts

  List recent AI Race Engineer conversations owned by the connected TuneWorks user. May be filtered to one vehicle.

• get_ai_race_engineer_transcript

  Read one AI Race Engineer conversation and its ordered messages. Internal execution debug traces are not returned.

• archive_vehicle

  Archive a connected user vehicle using TuneWorks soft-delete behavior. Requires explicit user confirmation and never hard-deletes data.

• list_setups

  Lists chassis setups and setup history saved in the connected TuneWorks account.

• create_setup

  Saves a new TuneWorks setup for a vehicle. Deletes are not supported.

• update_setup

  Edits an existing TuneWorks setup revision. Deletes are not supported.

• archive_setup

  Archive all active revisions of a connected user setup. Requires explicit user confirmation and never hard-deletes data.

• list_sessions

  Lists driving sessions, events, track days, autocross runs, and session notes saved in TuneWorks.

• create_session

  Saves a new TuneWorks driving session. Deletes are not supported.

• update_session

  Edits an existing TuneWorks driving session. Deletes are not supported.

• copy_session

  Create an additive copy of an accessible TuneWorks driving session.

• archive_session

  Archive a connected user driving session. Requires explicit user confirmation and never hard-deletes data.

• list_maintenance

  Lists service reminders, maintenance history, due work, and completed maintenance saved in TuneWorks.

• create_maintenance

  Creates a TuneWorks maintenance reminder or service item. Deletes are not supported.

• update_maintenance

  Edits a TuneWorks maintenance reminder or service item. Deletes are not supported.

• archive_maintenance

  Archive a connected user maintenance item. Requires explicit user confirmation and never hard-deletes data.

• list_shop_lists

  Lists reusable shop lists, event prep lists, task lists, and parts lists saved in TuneWorks.

• get_shop_list

  Read one connected user shop list with its categories and items.

• list_shop_list_items

  Lists individual items and completion status in one connected user shop list, with optional filtering for open or completed items.

• create_shop_list

  Creates a TuneWorks shop list, task list, or parts list, optionally including categories and items.

• update_shop_list

  Edits shop-list metadata or replaces the full categories and items collection.

• add_shop_list_category

  Atomically add one category to an existing editable shop list without replacing its existing categories or items.

• add_shop_list_item

  Atomically add one item to an existing editable shop list without replacing existing items. If its category does not exist yet, TuneWorks creates it.

• copy_shop_list

  Create an editable copy of a connected user shop list with all item checks reset.

• reset_shop_list_items

  Reset every item in a connected user shop list to unchecked/open.

• update_shop_list_item

  Atomically check or uncheck one shop-list item, change its quantity, or do both.

• archive_shop_list

  Archive a connected user shop list so it no longer appears in active lists. Requires explicit user confirmation.

• delete_shop_list

  Delete a connected user shop list from active use by safely archiving it. Requires explicit user confirmation and does not hard-delete history.

• get_share_build_options

  Lists existing TuneWorks vehicles, setups, and sessions available for Share Build.

• preview_share_build

  Summarizes selected Share Build vehicle, setups, sessions, recipients, and message without sending email.

• get_user_settings

  Read the connected user’s preferences, unit choices, and custom vehicle makes.

• update_user_preferences

  Update selected preferences for the connected TuneWorks user.

• update_unit_settings

  Update unit-category choices for the connected TuneWorks user.

• create_vehicle_make

  Add a custom vehicle make to connected user settings.

• update_vehicle_make

  Rename or rescope a custom vehicle make.

• delete_vehicle_make

  Permanently delete a custom vehicle make after explicit confirmation.

• list_chart_channel_sets

  List saved chart-channel sets.

• create_chart_channel_set

  Save a named set of chart channels.

• mark_chart_channel_set_used

  Update the last-used time for a saved chart-channel set.

• delete_chart_channel_set

  Permanently delete a saved chart-channel set after explicit confirmation.

• list_favorite_charts

  List favorite charts for an accessible vehicle.

• create_favorite_chart

  Save a favorite chart for an accessible vehicle and source log.

• delete_favorite_chart

  Permanently delete a favorite chart after explicit confirmation.

• get_vehicle_map_config

  Read the saved map-channel configuration for an accessible vehicle.

• save_vehicle_map_config

  Create or replace the connected user’s complete map-channel configuration.

• complete_maintenance

  Record completed maintenance in vehicle history and advance its tracker.

• list_ecu_files

  List ECU-file metadata, optionally scoped to an accessible TuneWorks vehicle. Supplying vehicleId enables vehicle-specific recovery guidance. Binary contents are never returned.

Details

More cloud and devops servers See all

• OxyPages

  Deploy HTML pages and built web apps (React, Vue, Vite) to a live HTTPS link from your AI agent.

• Privi Call

  One number per AI agent: route MCP calls to any agent, every call sealed in an on-chain log.

• OldWeb Diagnostics

  Public DNS, HTTPS and deployment checks, plus offline email header and delivery-log tracing.

• OldWeb Logs

  Offline log parsing, CI failures, HTTP capture analysis and bounded JSON configuration validation.

• TrainRec

  Your AI assistant logs your meals and workouts, then plans your week from what you did.

• ZeroPhase

  BUD/S prep training: read today's workout, log tasks and PST results from your agent.